
Add to Cart
LSZH Mineral Insulated Thermocouple Cable DHP Copper Sheath Voltage Rating
FIRECEL MI are intended to be installed in critical safety circuits which are used to operate under fire conditions in severe applications where the mechanical cables performances are primarily required.
Production process foresee many steps of diameter reduction (both drawings and rollings) separated by high temperature annealing.
Strong compression of MgO powder (density about 2 g/cm3) allows very high values of insulation resistance (also if burned, 180° bent or flattened) and thermal conductivity. Therefore current ratings are higher than soft skin cables, especially at high temperature.
Cable Uses
Fire Standards
Our ’Enhanced’ MI cables are manufactured in the European Union in accordance with British Standards BS EN 60702 –1: 2002 and EN 50200:2013 Clause 26.2. They hold LPCB-certification.
Cable construction
Conductor | ETP solid (not stranded) copper cores, from 1 to 400 mm2, melting point 1082°C |
Insulation | Magnesium Oxide (MgO) as electrical insulation, high performance at high temperature (melting point 2600°C) |
Metallic Outer Sheath | High quality DHP copper sheath, manufactured starting from tubes extruded and drawn only (not welded), melting point 1082°C |
Outer Sheath | LSZH additional outer covering. Such flame retardant polyolefin is characterised by high performance in corrosion resistance and low smoke emission |
General Standards
Basic Design | IEC 60702-1 & 2 |
Fire resistant | BS 6387 (cat. C-W-Z) BS 8434-2 EN 50200 annex E IEC 60331-21 |
Acid gas emission | IEC 60754-2 |
Smoke density | EN 61034-2 |
Available in the following colours: black, red & white with any other colour available for manufacture.
“AC”clips packed in 100`s “rsfj”double clips packed in 50`s glands packed in 100`s
Prefix to product code for ordering purposes.
Carriage paid on all orders over £250.00 nett value.
Flame retardant glands red also available on request
Locknuts for glands charged extra m20 locknuts
30150 the recommended stripping tool
T3964 cable cutter for o.D. 50.0mm or 14.0mm max