Multi Core Low Voltage Power Cable For Electricity Supply BS 5467 Standard

Multi Core Low Voltage Power Cable For Electricity Supply BS 5467 Standard

Low Voltage Power Cable Application

These power and control cables are used for electricity supply in low voltage installation systems. They are well adapted to underground use in industrial applications with an additional mechanical protection. These cables can be fixed on cable trays, within conduits or fixed to walls.

Low Voltage Power Cable Standards

The electrical and dimensional properties of this product are measured by the Technical and Quality Assurance department at the National Cable Factory laboratory. Cable performance in respect of conductor resistance, construction quality (workmanship), dimensional consistency, and other parameters are verified to published standards and approved product drawings. Conformance to RoHS (Restriction of the use of Hazardous Substances) is determined and confirmed.

Low Voltage Power Cable Construction

Conductor
RE: Class 1 solid copper conductor according to BS EN 60228
RM: Class 2 stranded circular or circular compacted conductor
according to BS EN 60228

Insulation
XLPE (Cross-Linked Polyethylene)

Bedding
PVC (Polyvinyl Chloride)

Sheath
PVC (Polyvinyl Chloride)

Low Voltage Power Cable Characteristics

Voltage Rating (Uo/U)
600/1000V

Temperature Rating
During installation -5°C to +50ºC
Fixed Installation: -20°C to +90°C
Permissible operating temperature at conductor +90°C
(Short circuit temperature: 250ºC)

Minimum Bending Radius
12 x overall diameter

Core Identification
1 core: Black
2 core: Blue Brown
3 core: Brown Black Grey
3 core including earth: Brown Blue Green/Yellow
4 cores: Blue Brown Black Grey
4 core including earth: Green/Yellow, Blue Brown, Black
5 cores: Blue, Brown, Black, Grey, Black
5 core including earth: Green/Yellow, Blue, Brown, Black, Grey
7 cores and Higher:
Black cores and White numbers + Green/Yellow

Sheath Colour
Black

Size, Weight & Electrical Specification