BS 5308 Low Smoke Zero Halogen Cable Silicone Class 1 Solid Copper Conductor

BS 5308 Low Smoke Zero Halogen Cable Silicone Class 1 Solid Copper Conductor

APPLICATION

BS 5308 cables are designed to carry communication and control signals in a variety of installation types including those found in the petrochemical industry. The signals can be of analogue, data or voice types and from a variety of transducers such as pressure, proximity or microphone. Part 1 Type 2 cables are designed where a greater degree of mechanical protection is required or where there is direct burial at a suitable depth. Collectively and individually screened pairs are available within the range.

CONSTRUCTION
Conductor

Class 1 solid copper conductor according to BS EN 60228 (previously BS 6360)
Class 2 stranded copper conductor according to BS EN 60228 (previously BS 6360)
Class 5 flexible copper conductor according to BS EN 60228 (previously BS 6360)

Insulation

Silicone rubber ceramic type

Binder Tape
PET (Polyester Tape)

Individual And Collective Screen
AL/PET (Aluminium/Polyester Tape)

Inner Sheath
LSZH (Low Smoke Zero Halogen) Type LTS3 according to
BS 7655

Drain Wire
Tinned copper

Armour
Galvanized steel wires

Outer Sheath
LSZH (Low Smoke Zero Halogen) Type LTS3 according to BS 7655

STANDARDS

BS/PAS 5308, BS EN 60228, BS 6234, BS EN 50363,
BS EN/IEC 60331-21, BS EN/IEC 60332-1,
BS EN/IEC 60332-3-24, BS EN/IEC 61034-2,
BS EN/IEC 60754-1 and 2, BS EN/IEC 60332-3-22

We supply LPCB Certified products
The electrical and dimensional properties of this product are measured by the Technical and Quality Assurance department at the Cables laboratory. Cable performance in respect of conductor resistance, construction quality (workmanship), dimensional consistency, and other parameters are verified to published standards and approved product drawings. Conformance to RoHS (Restriction of the use of Hazardous Substances) is determined and confirmed

Voltage Rating (Uo/U)

300/500V

Operating Temperature
+200°C

Temperature Rating
+5°C to +50°C

Outer Sheath Colour
Red Black

LSZH cable selection

There have been many developments in relation to LSZH cable standards and legislation since the Kings Cross Station fire of November 1987 which resulted in 31 fatalities. Findings from the official investigation outlined that the majority of these deaths were as a result of toxic fumes, pointing to the vast quantities of PVC present in the building, much of which was in PVC cables. PVC cables were subsequently banned by London Underground.

As a leading rail & metro cable supplier, Eland Cables is well-positioned to understand the implications involved when selecting an LSZH cable for use in any other industry. Please contact our technical team to discuss your specific requirements and our comprehensive range of LSZH cables for all applications, including building & construction, oil & gas, and marine & offshore.